1.8" v2 Floater Wheels - *BRUSHED* "Supernova" wheel face with "Peep" floater
Big, brushed stainless steel wheels with floaters supported by ball bearings.
This is a complete wheel that can be run with or without the floater. Sold as a set of 4. The wheel face, beauty ring, and inside ring are brushed 304 stainless steel. The 3D printed parts are PETG and all of the holes are pre-drilled for ease of installation. You will need a 0.9mm driver to install the beauty ring and hub hardware, or you can substitute standard M1.4x6 hardware. A small amount of temporary thread lock (blue Loctite) is recommended to help keep the mounting post properly fastened during use.
Included:
- (4) Polished wheel faces
- (4) Polished beauty rings
- (4) Polished inside rings
- (4) Polished floaters
- (4) Mounting posts
- (1) Spinner/floater removal tool
- (4) PETG barrels
- (4) PETG +4mm wheel face rings
- (4) PETG +0mm hubs
- M1.4x5 standard hardware
- M1.4x6 flush head hardware
*Tires are for demonstration and not included.
Quality Guarantee & Returns
- Quality is guaranteed. If there is a print error or visible quality issue, we'll replace or refund it.
- Because the products are made to order, we do not accept general returns or sizing-related returns.
